Rooftop solar power has taken Australia by storm, with more than 10% of suitable rooftops now decked out with solar panels across the country. Different sizes of solar PV systems have proliferated depending on which incentives & what prices were available at the time of installation, as well as on the electricity needs of the home or business in question.

Generally speaking, 10 kilowatts (kW) is the upper limit for residential solar systems in Australia because a system of this size will produce sufficient electricity to meet a home’s daytime electricity needs. An 8kW solar system–just between the 10kW upper limit and extremely popular 5kW solar systems–would be ideally suited for a home with slightly higher electricity demand than average.

As systems have grown more affordable, more and more Australians are opting for systems above the 5kW capacity range, with systems in the 7kW and 8kW capacity range gaining popularity as well.

Pricing for 8kW solar systems

Every month Solar Choice publishes solar PV system prices from across Australia based on raw pricing data from our installer network. Smaller system sizes (up to 10kW) are included in our Residential Solar PV Price Index articles, while larger systems (between 10kW and 100kW) are included in our Commercial Solar PV Price Index articles. Neither of these articles specifically includes pricing for 8kW solar systems, but it is still possible to get a good indication of where pricing would come in.

The August 2014 Residential Solar PV Price Index shows that the average dollar-per-watt (1 kilowatt = 1000 watts) price for a fully installed 5kW system was around $1.68 ($1.68 x 5000W = ~$8,400), while pricing for a 10kW solar system was around $1.54 ($1.54 x 10,000W = ~$15,400). Making the reasonable assumption that the $/W cost of a 8kW solar system would be somewhere between these two, we come out with an average price of $1.61 ($1.61 x 8000 = $12,880).

Solar Choice Solar PV system prices high low average August 2014

Prices from Solar Choice’s Solar PV Price Index article for August 2014.

You can receive a free and instant comparison of quotes from solar installers in your area by filling out the form to the right of this page. Instant quotes will include systems sized 1.5kW, 2kW, 3kW, 4kW and 5kW, but prices for larger system sizes (including 8kW) are available on request and through consultation with our team.

8kW solar systems: Power output

As with any solar PV system, actual power output for an 8kW system will depend on a number of variables.

-Location and climate

Tilt & orientation of the solar panels

Presence or absence of shading

-How hot the solar panels get (overheating can reduce power output, while cooler conditions are generally more favourable)

-The quality and sizing of the system’s inverter(s)

-The performance of these and other components in the system

Perhaps the most basic factor included in the list above is the amount of sunlight that is available in a given region. The metric used by the solar industry to measure solar potential is ‘Peak Sun Hours’ (PSH). A Peak Sun Hour is the equivalent of one hour of full sunlight. As the sun moves through the sky, the strength of the rays it casts on a particular location varies. Most places experience peak sun around noon or 1pm, while sunshine is weaker in the late afternoon and early morning.

Sydney, for example, gets approximately 4.8PSH per day, averaged throughout the year–more in summer, less in winter. (Values for other cities can be found at the bottom of our Solar System Payback & ROI Calculator).

A perfectly efficient 8kW solar system in Sydney would generate about (4.8 ‘peak sun hours’ x 8kW =) 38.4 kilowatt-hours (kWh) of power per day. That being said, no system is perfectly efficient, and it’s safer to be conservative and derate this figure to about 77% of its face value for a standard, north-facing system. This would reduce to about 29.6kWh. (Check out our solar payback calculator to learn more.)

8kW solar systems: Payback & Returns

Like solar system output, payback periods and returns on investment for a solar system of any size are dependent on a number of factors. The main things that make solar power such an excellent investment in Australia are the relatively low cost of having a system installed and the high cost of electricity.

Meanwhile, state-based solar feed-in tariffs, which were once the primary incentive mechanism for going solar, have been reduced and relegated to a less important reason for going solar. Feed-in tariffs are now either voluntary or minimal in most of Australia–meaning that an electricity retailer is not required to pay solar homes and businesses anything for their excess power. Understanding the implications of this is key to getting the most out of a system.

Focus on solar self-consumption of solar power is now the rule

If you own a solar system, you will want to consume as much of the power it produced as possible because this will save you the greatest amount of money on your power bill. The rates for electricity purchased from retailers (anywhere from 18¢-27¢ or more depending on the location, retailer, and tariff in question) are significantly higher than the rates offered by the same retailers for excess solar power (which max out at 10¢/kWh in most Australian states).

Every unit of self-generated solar power which is used on-site by a home or business is a unit of electricity that does not need to be purchased from the grid–and will therefore save the system owner money. Electricity generated by solar panels flows first into appliances that happen to be running on-site–any  excess is sent automatically into the grid.

How can you ensure that you use as much of the solar power as possible? Step 1 would be ensuring that you get a solar system that is appropriately-sized for your needs. Step 2 would be understanding your electricity usage profile and working to optimise your power usage. 

Check out Solar Choice’s solar power system ROI calculator

Want to learn more? Try plugging some figures into our solar system ROI calculator. Self-consumption is just one of the variables that can be adjusted to determine your likely payback time and return on investment.

8kW solar system payback and ROI snapshot

© 2014 Solar Choice Pty Ltd


Edmund 8 March, 2016 at 6:51 am

Hi Solarchoice, would consider extending your pv business to Nigeria? I am looking for offshore technical partners to help me PV/Storage Battery engineering designs for construction and installation in Nigeria. I have electrical engineering background and would handle installation locally. Thank you

Solar Choice Staff 8 March, 2016 at 8:52 am

Hi Edmund. Thanks for the approach but we only operate in Australia and do not have plans to expand overseas at this point.

Comments on this entry are closed.

Previous post:

Next post: